Measure And Add Detergent And Care Products - Siemens WM08K060HK Instruction Manual

Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Measure the detergent and care
products according to:
Water hardness; ask your water
■
supply company
The manufacturer's instructions on
■
the packaging
The amount of laundry
■
Soiling
■
Filling
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Dilute viscous fabric softener and
Note:
fabric conditioner with water; this
prevents blockages.
Pour the detergent and care products
into the appropriate compartments:
Operating the appliance
Measuring aid A* For liquid detergent
Compartment II
Compartment i Fabric softener,
Compartment I
Pull out the detergent drawer as far
1.
as possible.
Add detergent and/or care products.
2.
Close the detergent drawer.
3.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
Slide the measuring aid forwards,
2.
fold it down and click it into place.
Reinsert the drawer.
3.
Do not use the measuring aid for
Note:
gel detergents and washing powder, or
for programmes with prewash or when
"Ready in" time is selected.
Detergent for the
main wash, water
softener, bleach,
stain remover
starch
Do not exceed the
max.
Detergent for
prewash
en
17