Siemens WM06A160BC Instruction Manual And Installation Instructions
Siemens WM06A160BC Instruction Manual And Installation Instructions

Siemens WM06A160BC Instruction Manual And Installation Instructions

Advertisement

Quick Links

Instruction Manual and Installation Instructions
en

Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WM06A160BC

  • Page 1: Washing Machine

    Instruction Manual and Installation Instructions Washing Machine...
  • Page 2 2 en...
  • Page 3: General Safety Guidelines And Warnings

    General safety guidelines and warnings Points to bear in mind when washing clothes: Points to bear in mind before operating the appliance: Points to note for the protection of the appliance: Points to note when transporting the machine: Removal and disposal of packaging ó...
  • Page 4: Environmental Protection / Saving Energy

    Environmental protection / Saving energy m The most economic and least aggressive use sible into the machine according to the se from an environmental point of view is always lected programme. to load the maximum amount of laundry pos Installing the appliance When installing the appliance and connect If necessary, fix the appliance to the floor us ing it to the water supply and mains, the...
  • Page 5: Fixing The Appliance

    Fixing the appliance The appliance must be firmly fixed and m Correct the height of the feet. settled on its four feet, not rocking. m Securely tighten the locknuts so that the ad If necessary, level and stabilise the appliance us justments made to the feet cannot be altered ing the adjustable feet.
  • Page 6: Connecting To The Electricity Supply

    Water drainage (pic. 4) When setting up and connecting the ap If draining through a sink, make sure the dis pliance to the water outlet supply, make sure charge pipe cannot be moved from its loca the pipe is not bent or twisted. Do not pull the tion.
  • Page 7: Getting To Know Your New Appliance

    Getting to know your new appliance 1. Protective plate (cover) 2. Drawer for detergent and additives 3. Control panel 4. Rating plate 5. Door 6. Lever for opening the door 7. Drainage pump 8. Adjustable front feet to level the appliance Water inlet pipe 10.
  • Page 8: Programme Selector

    Programme selector Selecting programmes using the programme «Delicates » selector. For this, the control knob needs to be Very delicate clothing, 30 ºC: cotton, synthetic turned and the mark positioned on the pro or mixed materials, curtains. Does not spin gramme selected.
  • Page 9: First Washing Cycle

    First washing cycle Carry out the first washing cycle without any m Set the programme selector to «Cotton -wash Q 90ºC ready laundry in the machine to remove residual wa ». The « » indicator ter left inside the drum as a result of testing of light flashes.
  • Page 10: Washing The Laundry

    Loading the laundry (pic. 5) Open the door Close the door m Pull the lever. Make sure there are no items left trapped be tween the door and the rubber seal. Put the laundry in the washing machine m Close the door by pressing it against the Garments previously treated with detergents frame of the appliance, until you can hear the containing solvents, such as stain removers...
  • Page 11: End Of The Wash Programme/Removing The Laundry

    End of the wash programme/Removing the laundry The «Spin C » indicator light flashes. Taking the laundry out of the machine m Turn the programme selector to « ». m Turn off the tap. If «no spin D» has been selected: m Open the door.
  • Page 12 Cleaning / Maintenance / Frost protection (pic. 6, 7, 8, 9) Before performing any type of mainte Cleaning the drainage pump nance work on the appliance, it must be disconnected from the mains and the tap turned off. External cleaning of the appliance Procedure Cleaning the detergent drawer m Risk of burning!
  • Page 13 Cleaning the filters in the water inlet Frost protection Drain the water from the pump: Cleaning the drainage pump Drain the water from the inlet pipe: Procedure Spin C Empty Spin C Empty Start M »...
  • Page 14: Minor Faults With Simple Solutions

    Minor faults with simple solutions Possible cause / Remedy Malfunction The function indicator does not come Electrical power failure Cleaning the drainage pump The wash cycle does not start Start ready d wash » «rinse » Water is not visible in the drum Washing result is unsatisfactory Foamcomes out of the detergent dra Foam is visible after the final rinse...
  • Page 15: After Sales Service

    After Sales Service (E-Nr) (FD) Minor faults with simple solutions E-Nr. Product nr. Serial nr. Consumption figures Consumption ** Programme Programme Size of load Size of load Energy Water Duration Cottons/Colourdes y 40 ºC 5.00 kg* 0.55 Kwh 54 l 110 min Cottons/Colourdes y 60 ºC...
  • Page 16 WM06A160BC 1007 en SIEMENS ELECTROGERÄTE GMBH 9000 187 279...

Table of Contents