Intellimute - Cobra XRS 9775 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer

IntelliMute

Assistance
in Icons
IntelliMute is a unique new feature that allows you to avoid alerts you
don't need to hear because you are stopped or moving slowly. By sensing
the "revs" (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
Secondary Icons
emergency vehicles).
Intro Operation Customer Warranty
Assistance
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 15). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
Notice
each time the power is turned on. An i will appear in the display when
condary Icons
IntelliMute is on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
Notice
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
To turn IntelliMute on or off using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
Tone
go to IntelliMute.
Two beeps
One beep
IntelliMute On
N W
I n t e l l i
Mute
On
14 English
Warranty
Visual Display Voice
IntelliMute On, IntelliMute On
then i appears
in the display
IntelliMute Off IntelliMute Off
IntelliMute Off
i h I n t e l l i
Mute
Off
Settings
Your Detector
Intro Operation
What to remember while using IntelliMute
IntelliMute works with all City and Auto Mute modes.
Whenever engine revs are below the activation point, an arrow
pointing down will appear in the display. Above the activation point,
Main Icons
Secondary Icons
an arrow pointing up will appear.
Below Activation Point
Main Icons
N W i h
Intro Operation Customer Warranty
Assistance
Notice
If, for any reason, the unit stops sensing your engine's revs,
IntelliMute will indicate an error and automatically turn off.
Intro Operation Customer Warranty
Assistance
The rev point you set will be stored in the unit's memory when
Secondary Icons
power is turned off and recalled each time the power is turned on.
NOTE
Secondary Icons
Main Icons
The rev point must be reset if you use your detector in a different vehicle.
Notice
NOTE
When initially choosing your IntelliMute activation point, a setting
Notice
of approximately 300 to 600 RPMs above idle is recommended.
Intro Operation Customer Warranty
Assistance
You can reset the activation point at any time to fit your individual
preferences and driving style.
Setting The IntelliMute Activation Point
Customer
Installation
Assistance
Your detector must be installed in your vehicle.
Secondary Icons
CAUTION
Do not attempt to set the rev point while driving.
Your vehicle should be parked and idling.
Notice Caution Warning
IntelliMute must be turned on before setting the activation point.
Customer Warranty
Assistance
Above Activation Point
N W i h
Nothing comes close to a Cobra ® 15