Pop Alert - Cobra XRS 9775 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer
Assistance
Select/Dim Button
Program/Mute Button
Secondary Icons
To Calibrate the Compass using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode, go to
Set Compass.
Notice
Press and hold the Set/City button
to begin setting the compass.
Within two minutes, drive your vehicle
in a circle twice, then press
the Set/City button again.
in Icons
Press and release either the Select/Dim
button to proceed to the next user
mode or the Program/Mute button
Intro Operation Customer Warranty
Assistance
to exit Program mode.
Set Compass
condary Icons
Set Compa...
NOTE
If you do not press the Set/City button within two minutes after beginning
Notice the set compass process, compass calibration will automatically terminate.
Tone Visual Display
One beep Compass not set...
Please try again...
18 English
Warranty
Tone Visual Display Voice
None Set Compass None
One beep Drive in two Set Compass
circles...
Press SET
when done...
Three beeps Compass Set! Compass Set
For two
seconds
followed by
direction of
travel (N, NE,
E, SE, S, SW,
W or NW)
None None None
Calibrate
Compass Compass Set
D r i v e i n . . . Compass
Press SET... Set!
Terminate
Voice
Compass not set... Compass n...
Please try again...
Please tr...
Your Detector
Intro

Pop Alert

Set/City
Button
Pop Alert will alert you of Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect off.
Secondary Icons
To turn Pop Detect Mode on or off using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to Pop Detect.
Direction
Of Travel
N W h
Settings
Operation Customer Warranty
Assistance
Tone Visual Display
Two beeps Pop On
Notice
One beep Pop Off
Pop Detect On Pop Detect Off
Pop On Pop Off
Voice
Pop On
Pop Off
Nothing comes close to a Cobra ® 19