Advertisement
H
On the Wireless Security
Settings screen, select a level
of WEP encryption, 64 Bit Keys
or 128 Bit Keys. Then enter a
Passphrase to automatically
generate a WEP key. Then
click Next.
If you would like to enter your
H
WEP key manually, leave the
Passphrase field blank and
enter the WEP key on the next
screen. Then click Next.
I
If you used a Passphrase, then
a WEP key will appear on the
following screen. Otherwise,
enter your WEP key in the Key 1
field. Click Next.
I
J
On the Confirmation screen,
make sure your settings are
correct. Click Yes to save your
new settings.
K
On the Congratulations
screen, click User Install to
install the PrintServer's driver.
J
K
Model No.
Install and Configure the
3
PrintServer's Driver
Linksys recommends that you set up
your printer and install your printer's
driver before you install the
PrintServer's driver.
A
On the Print Server Driver Setup
Welcome screen, click Next.
B
On the Choose Destination
A
Location screen, select the
location where the driver's
folder will be installed. If you
want the folder to be installed
in a different location, click
Browse and select the
location. Click Next.
C
The Select Program Folder
screen will appear. An icon will
be added to the program
B
folder listed. If you want, you
may change the name of the
program folder. Click Next.
C
D
After the driver is installed, the
Setup Complete screen will
appear. Make sure Configure
Print Driver now is selected.
Click Next to end the driver
installation and begin the driver
configuration.
E
Double-click the Print Driver
D
Setup icon on your desktop. If
you do not see the icon, click
Start, Programs, Print Server
Utility, and Print Driver Setup.
F
Read the Information screen,
and click OK.
G
On the Printer Port Setup
screen, select a printer port to
F
add, and click Next.
H
You will be informed that the
PrintServer Port has been
added successfully. Click OK.
G
I
The Configure Printer Port
screen will appear. Your
installed printer(s) will appear in
the Existing Printers field. Select
the printer you want, and click
the Connect button to
associate the printer with your
selected printer port. To add
another printer, click Add New
Printer and follow the on-
screen instructions.
I
J
When you have finished
configuring the PrintServer's
driver, click Close on the Printer
Port Setup screen.
Congratulations! The installation of
the PrintServer is complete.
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
WPS54G-QI-40917A JL
Advertisement
