X-Rock MAUI Owner's Manual page 9

4) When the third layer of glue is dry, apply the patch without pressing and adjust the positioning if required. Press the air bubbles
which may have formed under the patch by smoothing the patch with a round object such as a spoon. Do this procedure by starting
in the center of the patch towards the outside. Clean any excess glue. Drying: 12 hours.
YOUR PRODUCT IS DESIGNED IN ACCORDANCE WITH THE STANDARDS
FOR A SPECIFIC USE.
ANY MODIFICATIONS OR EXCESSIVE USES COULD RESULT IN SERIOUS RISKS FOR
THE USER AND WILL VOID THE WARRANTY.
offers 1 year Manufacturer Limited Warranty on the board (excluding attachments and other accessories in the package) to the
original owner from the date of purchase. We guarantee against any abnormal defect in workmanship and materials within this
period. Cosmetic issues such as paint fading, and any customer-initiated modifications to the product are not covered by warranty.
shall not be held liable for incidental and consequential damages. If the board is found to be defective, the owner may return it
to the store it was purchased from with the original sales receipt.
transport. After inspection,
with an equivalent product.
This warranty commitment does not cover claim conditions listed below:
Boards purchased in used condition.
Boards used in rental, commercial, or teaching environment.
Damage or defects caused by impact with any materials or objects such as rocks, docks, other
boards, etc.
Damage or defects caused by use outside of its intended purpose.
Damage or defects caused by normal wear and tear.
Damage or defects caused by transport, loading, unloading, dropping, or out of water handling. Including marks
left by over tightening transport straps.
Damage or defects caused by heel dents also known as pressure dings.
Damage or defects caused by inappropriate storage in temperatures over
Damage or delamination caused by overheating as a result of exposure to direct sunlight while not in use.
Damage or defects caused by wave impact and/or impact with ocean/lake floor.
Damage or defects caused by storage of the board in closed, damp conditions (example a wet board bag).
Damage to fin or fin box caused by impact to the fin.
For more information about
www.xrock.co.uk
YOUR PRODUCT IS DESIGNED IN ACCORDANCE WITH THE STANDARDS FOR A SPECIFIC USE. ANY
MODIFICATIONS OR EXCESSIVE USES COULD RESULT IN SERIOUS RISKS FOR THE USER AND WILL VOID
THE WARRANTY.
WARNING!
reserves to the right to either have the defective part or product professionally repaired, or replaced
, please visit our website:
WARNING!
www.x-rock.co.uk
instagram: xrock_sup
shall not be responsible for any damage or lost during
32°C / 90F and under 0°C / 32F.