Download Print this page

Electrical Parameters - Yingsheng Electronic Technology CW-004 Operating Instructions Manual

Pet trainer

Advertisement

 
pet suddenly cries out or feels panic, it may be caused by the high level of the vibration or beep
sound. In this case, the vibration or beep sound shall be turned off or turned down immediately.
5. During the training process, please use language reward or food reward to cooperate with
the training, so that you can quickly and accurately correct some improper habits and actions of
the pet. When the pet does not make mistakes or is resting, please stop using the trainer and turn
off the power supply of the receiver. If the pet does not accept any intensive training or any
command, you shall conduct intensive training for a period with the help of a leash to correct this
condition.
6. The training shall be conducted in stages with 15 minutes for each stage. A too-long
continuous training may make your pet fatigued, antagonistic, and upset. If your pet shows any
aggressive or biting behaviors during the training, please stop training immediately and consult a
professional pet trainer to find out the reason for such behaviors.
Electrical parameters:
Remote control distance: 1,500 meters in open and unobstructed areas; 50-500 meters if there
are walls or obstacles;
Working mode: Voice call, vibration, and beep;
Charging voltage: Transmitter: DC-5V; Receiver: DC-5V
Battery capacity: Transmitter: 500MA; Receiver: 500MA
Frequency: U.S. standard: 462.5625MHZ; European standard: 446.00625MHZ
Transmitting power: 0.5W
Precautions:
Check whether the pressure of the vibration contacts is too large before using the collar, and
change the contact positions every one to two hours if possible. 3. Do not connect the leash to the
collar directly as this will cause too large a pressure of the contacts to injure the pet's skin. When
wearing a leash collar, be sure to avoid pressing on the collar of the trainer. 4. During the initial
period of use, check the contact area daily for rash or ulcers. If any, please stop using the trainer
immediately until the skin returns to normal. 5. As a waterproof device, the receiver can resist rain
or water splash, but it cannot be immersed in water. The transmitter is not waterproof and must be
kept away from water. 6. When operating the transmitter, do not touch the antenna, as it will affect
the remote control distance and the call quality. 7. Without a power button, the transmitter starts
when any key is pressed and enters the sleep mode (power-off) automatically when there is no
operation for five seconds. 8. Upon use of the receiver's charging port, make sure to restore the
waterproof silica gel plug fully. As the transmitter is not waterproof, keep it away from water to
avoid damaging the unit.
Important safety information: Warning:
aggressive pets. Do not use this product if your pet is aggressive or shows any sign of aggression.
Using this product on an aggressive pet may cause serious injury to the owner or others. If you are
not sure whether your pet is suitable for this product, consult your veterinarian or pet trainer.
2. The product contains a built-in rechargeable battery. When scrapped or disposed of, please put
it into an exclusive recycling bin to avoid environmental pollution.
IC Caution.
1. Do not let your pet wear the collar for more than 10 hours a day. 2.
1. The product is not suitable for

Advertisement

loading