Advertisement
Product features:
open and unobstructed areas and can reach as far as 50 to 500 meters even when there are
obstacles or walls. In addition to remotely-controlled vibration and beep, it also has an upgraded
voice call function which enables you to send real-time voice commands to and recall your pet
even if you cannot see where the pet is. It allows one remote controller to control up to three pets
respectively as long as they have worn a receiver (for this function, you shall purchase the receiver
combination package). As a waterproof device, the receiver can resist rain or water splash, but it
cannot be immersed in water.
Instructions for the power supply of the transmitter:
1. The unit comes with a built-in rechargeable polymer battery, a charging port on the right
side (the waterproof silica gel plug shall be removed when the port is used for charging), and a
USB charging cable (all DC 5V phone chargers with a USB port are compatible with the cable)
when leaving the factory.
2. The unit must be fully charged when used for the first time. It runs in an automatic
power-saving sleep mode. Without a power button, it starts when any key is pressed and enters the
sleep mode (power-off) automatically when there is no operation for five seconds.
3. The unit shall be charged timely when its display prompts low battery. Long-time
under-voltage operating will cause damage to the battery.
Instructions for the power supply of the receiver:
Vibrating contacts
Collar fastening buckle
The product can achieve remote control up to 1,500 meters when used in
Channel and charging
indicator light
Advertisement
