Using The Surround Mode - JVC THM42 Instructions Manual

Creating realistic sound fields
IMPORTANT
Before using the remote control for the
following operation;
• Set the remote control mode selector to
AUDIO.
Remote control
mode selector
29

Using the surround mode

The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.
On the remote control:
7 When playing back digital multichannel software
The appropriate multichannel surround mode is automatically
activated.
"DOLBY D":When a software encoded with Dolby Digital is
played back
"DTS": When a software encoded with DTS Digital
Surround is played back
In these cases, you can only turn on or off ("SURR OFF") the
surround mode.
7 When playing back 2 channel source
You can select either mode of Dolby Pro Logic II (PL II MOVIE/
PL II MUSIC) or one of the DSP modes (LIVE CLUB/DANCE
CLUB/HALL/PAVILION/ALL CH ST.).
Press SURROUND (MODE).
The surround mode is turned on and the current surround mode
appears on the display window.
Each time you press the button, the surround mode changes as
follows;
] ]
PL II MOVIE PL II MUSIC
] ]
CLUB HALL PAVILION
beginning)
For details on each mode, see pages 27 and 28.
To turn off the surround mode
Press SURROUND (ON/OFF).
Each time you press the button, the surround mode turns on and off
alternately.
O
SURR OFF (surround off)
(surround on)
NOTE
• When selecting "PL II MUSIC", "PL II MOVIE", "DOLBY D" or
"DTS" as the surround mode, the SURROUND indicator lights.
• When selecting one of the DSP modes ("LIVE CLUB"/"DANCE
CLUB"/"HALL"/"PAVILION"/"ALL CH ST.") as the surround
mode, the DSP indicator lights.
• For Dolby Digital 2 channel software, you can select "PL II MUSIC"
or "PL II MOVIE".
Storing adjustments — auto memory
This system memorizes the surround mode settings for each source.
• When you turn the power off:
When turning the power on again, the memorized settings for the
current source are automatically recalled.
• When you change the source:
The memorized settings for the newly selected source are
automatically recalled.
NOTE
• If the source is FM or AM, you can assign a different setting for each
band.
] ]
LIVE CLUB DANCE
] ]
ALL CH ST. (back to the
current selected mode