Hoisting (Lifting Lugs) - Rinnai SE Series Installation Manual

Hoisting (Lifting Lugs)

Lugs are installed on the top side of the following
racks for hoisting and moving. The lines or cables to
the lugs should be at a 90° angle. Use a spreader
lifting bar to hoist these racks.
Weights of the complete assemblies are available in
the Specifications section of this manual.
NOTE: DO NOT hoist the crate or palette.
MODELS AVAILABLE WITH LIFTING LUGS
TRS02ILW TRS02
TRS03ILW TRS03IL
TRS06
TRS046
TRS023ILW
Hoisting (Straps)
For the TRW02 and TRW03 wall hanging racks, use hoisting straps looped around the top frame.
Weights of the complete assemblies are available in the Specifications section of this manual.
NOTE: DO NOT hoist the crate or palette.
TRW02
TRW023
TRW02ST
TRS02IL TRS03
TRS04 TRS05
TRS036 TRS023IL
TRW03
TRW02SE
TRW03ST TRW03ST
Spreader Lifting Bar
90°
Hoisting Straps
29 Rinnai Rack Installation