Sony LinkBuds YY2969 Help Manual page 58

*
If Passkey input is required, input "0000".
The headset and computer are paired and connected with each other.
When the headset is stored in the charging case, the indicator (blue) on the charging case flashes slowly for about
5 seconds.
When you are wearing the headset, you will hear a notification sound from both headset units at the same time.
If they are not connected, see
If [LinkBuds UC] does not appear on your computer screen, try again from the beginning of step
* A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
When using the headset connected to the USB transceiver, there is no need to pair the headset with the computer. You can use
the headset just by connecting the USB transceiver to the USB port on your computer.
To delete all Bluetooth pairing information, see
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, try again from the beginning of step
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired.
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration
information of the paired device with the oldest connection date is overwritten with the information for the new device.
When the pairing information for the headset has been deleted from the Bluetooth device.
When the headset is initialized.
All of the pairing information is deleted. In this case, delete the pairing information for the headset from the connected device
and then pair them again.
The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.
"Connecting to a paired computer (Windows
"Initializing the headset to restore factory
58
10)".
settings".
.
.