MTU 12V4000C Series Operating Instructions Manual page 20

Installing the transport locking
device on driving end (KS), ver-
sion A
1. Screw holder (4) with spacer sleeves (5) and
screws (6) onto crankshaft. Spacer
sleeves (5), optional.
2. Tighten screws (6) to specified torque using a torque wrench.
Name
Screw
3. Screw nut (3) with washer (2) onto holder (4). Screw on carrier (1) with washer (7) and nut (8) and tighten
nut (8) to specified torque using a torque wrench.
Name
Nut
4. Secure with nut (3).
5. Mark the engine as "Fitted with transport locking device".
Removing the transport locking
device from driving end (KS),
version B
1. Release the locknuts (2) on both sides of the
flywheel housing, remove screw (3) and take
off holder (8).
2. Unscrew screws (5) and remove with wash-
ers (4), cover plate (7) sign (6) and plates (1).
3. Store the removed parts of the transport
locking device carefully for possible reuse to-
gether with this documentation.
20 | Transport | MS150049/04E 2017-04
Size Type
M16 Tightening torque
Size Type
M24 Tightening torque
Lubricant Value/Standard
(Engine oil) 160 Nm +16 Nm
Lubricant Value/Standard
(Engine oil) 100 Nm +10 Nm