Panasonic DP-0 Series Manual page 3

APPLICATIONS
Suction confirmation for electronic parts
High-quality LCD display
Simple and highly visible display
The LCD offers a wide viewing angle so the display
is easy to see even from an oblique angle. The
alphanumeric display (12-segment display), the key lock
mark and the OVER mark are also clear and easy to see.
Comparative output
ON/OFF display
Key lock icon
OVER mark
Pressure unit display
Low pressure type: kPa, kgf/cm
High pressure type: MPa, kgf/cm
Compact & light weight design
Extra-short depth and light weight
The unit body measures only 24.9 mm
to allow installation in a shallow space. The main unit
weighs only about 25 g. The lightweight unit means
minimal load when mounted on a moving part such as a
robot arm.
Depth
Comparison with
dimension :
conventional model
Main unit
( )
DP-100 series standard
weight
pressure port type
Low pressure type and high pressure type available
Two types to choose from depending on your application
The low pressure type can be used with positive or
negative pressure, while the high pressure type is
suitable for positive pressure of up to 1 MPa.
Reference pressure check
Pressure/setting display
2
, bar, psi, mmHg
2
, bar, psi
0.980 in in depth
41
Approx. % shorter!
38
Approx. % lighter!
:
Digital Pressure Sensor
Selection of display color from red or white
The display color can be selected from red or white
in accordance with the output operation. Since the
detailed setting mode display is pink (unchangeable),
the pressure sensor status can be easily recognized by
color.
Mode
RUN mode
Display
Comparative output ON Comparative output OFF
color setting
Red for ON, white for OFF Red
White for ON, red for OFF White
Red
Red in normal status
White in normal status White
RUN mode
DP-0 series
(DP-100 series standard pressure port type)
Approx.
25
< Actual size >
g
24.9 mm
0.980 in
<Low pressure type>
Ideal for applications such
as suction. No mis-operations
occur due to vacuum
breakdown.
−100 kPa 0 kPa 100 kPa
Low
DP-001□
pressure type
High
pressure type
DP-0
SERIES
Detailed mode
White
Red
Pink
Detailed setting mode
Conventional model
40 40
Approx. Approx. g g
42.5 mm 1.673 in
<High pressure type>
Ideal for applications such
as checking reference
pressure. Can also be
used for simple suction.
1 MPa
DP-002□
3