Christie LX501 Supplement Manual page 3

Projector
LX501/LX601i
User Manual-Instant Stack Guide
User's Manual (detailed) - Instant Stack Guide
Supplement - Instant Stack Recommendations
A change in the specifications in the Instant Stack Guide and the
ENGLISH
recommendations for Instant Stack are described below.
The changed specification is shown below;
page 3
CAUTION ►
Keep a space of 30 cm or more between a side of the projector and other
objects such as a wall.
projectors, especially if you are installing the projectors side by side.
not to let the hot exhaust air from other projectors enter the intake vents of the
projector.
Recommendations for Instant Stack;
We recommend the following installation
conditions to ensure the best performance
when using Instant Stack, especially if the
images need to be superimposed precisely.
● Use the same model projectors.
● Arrange the projectors side by side. The
less space between the projectors the
better, but leave at least 30 cm.
● Make sure the projection screen is
perpendicular to the projectors.
● Project images larger than the recommended
screen size shown in the table. The greater
the distance between the projectors, the
larger the screen size needs to be.
L: distance Recommended screen size
[cm]
30
50
100
If you require more information on Instant Stack, please consult your dealer.
LX501/LX601i User Manual-Instant Stack Guide Supplement
Place the projector in a cool place with sufficient ventilation.
Keep a space of 30 cm or more between the two
[inch]
200
250
380
Screen size
L (30 cm or more)
1
Take care
Projector
0 ± 10cm
020-000518-01 Rev. 1 (04-2012)