netAlly AirCheck G3 User Manual page 525

Path Analysis App
AirCheck G3 must have an active network link on
the selected port to run a Path Analysis. If Any
Port is selected, available links are used in the
order shown in the Interface dialog above.
See Test and Management Ports for explan-
ations of the different ports and how to link.
Protocol: Tap to select the Connect (TCP), Ping
(ICMP), or Echo (UDP/7) protocol for your Path
Analysis.
TCP Port: This field only appears if you have
selected the Connect (TCP) Protocol. Tap to
enter the port number over which you want to
run Path Analysis. (You may need to enter a
specific port number because routes can vary
525