Linksys PCM200HA User Manual page 9

8. Click on the Identification tab. Type the name of your computer in the
Computer Name box. Choose a name that is unique from the other com-
puter names on the network. Do not click OK when you have completed
these fields.
9. Type the name of your workgroup in the Workgroup box. The
Workgroup name should be the same Workgroup Name in use by all of
the other PCs on the network. Do not click OK when you have complet-
ed these fields.
10. Enter a description of your computer in the Computer Description box.
This box is optional. Do not click OK when you have completed these
fields.
12
Linksys HomeLink Series
Phoneline 10M Integrated PC Card
11. Optional: Choose the Access Control tab. Ensure that Shared-level
access control is selected. If the setting is on User-Level access control
and you can't change it, skip to problem 6 in the Troubleshooting section.
12. Click the OK button. Your system may or may not ask you for your
Windows CD-ROM or the location of the Windows installation files. If
you have your Windows 98 CD-ROM, go to to D:\win98 (where D: is
your CD-ROM Drive) or to C:\windows\options\cabs if you
don't. Or, for Windows ME, go to D:\win9x (where D: is your CD-
ROM Drive) if you have your Windows CD-ROM, or to C:\win-
dows\options\install if you don't.
13. Once Windows has copied the necessary files, the System Settings
Change window (see next page) will appear. Remove all disks from your
PC and click on Yes to restart your PC. If you don't see this window, sim-
ply shut down Windows 98 or ME and restart your PC. Remember to
remove the driver disk and CD-ROM, if necessary, prior to rebooting.
13