Manually Installing The Network Components In - Linksys PCM200HA User Manual

5. Right-click on HomeLink Phoneline 10M Integrated Adapter. A pop-up
menu should open (below).
6. First, choose Disable.
7. When asked if you want to Disable the device, click Yes.
8. Right-click on the HomeLink Phoneline 10M Integrated Adapter again.
This time, select Uninstall. Click OK.
9. The Network Adapters category should be removed from the Device
Manager listing.
10. Click the OK button, and restart your computer.
Manually Installing the Network Components in Windows
28
Linksys HomeLink Series Phoneline 10M Integrated PC Card
95 & 98
Manually Installing Network Components
in Windows 98 or Millennium
There may be times when you will need to manually install missing Windows
networking components.
1. Click on Start, Settings, then Control Panel.
2. Double-click the Network icon. The Network window appears.
3. Click the Configuration tab. Make sure that the following network com-
ponents are installed.
• Client for Microsoft Networks
• Dial-Up Adapter
• Linksys HomeLink Phoneline 10M Integrated PC Card
• TCP/IP Dial-Up Adapter
• TCP/IP Linksys HomeLink Phoneline 10M Integrated PC Card
There may be other components listed in addition to the ones shown above. If
any of the above components are missing, add them as follows.
Client for Microsoft Networks
If you plan on connecting to an NT or 2000 file server or peer-to-peer net-
work, click the Add button. Highlight Client and click Add. Choose
Microsoft as the manufacturer in the Network Client box. Highlight Client
for Microsoft Networks and click OK. Click OK again if you are done adding
components; otherwise, continue adding the components you need. The com-
puter will begin copying files to your system. When the installation is com-
plete, you will be asked if you want to reboot. Click OK.
IPX/SPX-compatible Protocol
Click the Add button. Choose Protocol and click the Add button. Select
Manufacturer and choose Microsoft. Under the Network Protocol box, high-
light IPX/SPX-compatible protocol. Click OK . Click OK again if you are
done adding components; otherwise, continue adding the components you
need. The computer will begin copying files to your system. When the instal-
lation is complete, you will be asked if you want to reboot. Click OK.
29