en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
6 Basic operation
6.1 Switching on the appliance
▶
Set the slide control to the required fan setting.
a The appliance starts at the selected fan setting.
6.2 Switching off the appliance
▶
Set the slide control to the zero setting.
6.3 Switching on the intensive setting
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Set the slide control to .
a The intensive setting is switched on.
7 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
7.1 Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶
Allow the appliance to cool down before cleaning.
6
Switching the lighting on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching on intensive mode
6.4 Switching off the intensive setting
▶
Set the slide control to fan setting , or .
6.5 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press
.
6.6 Switching off the lighting
▶
Press
.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
▶
Wash sponge cloths thoroughly before use.