Table of Contents
Advertisement
■ Using the power cord holder
Adjust the cord to a suitable length and store
the rest of the cord in the bottom of the
power base.
■ Cleaning the appliance
Cleaning each part
Kettle (outside)
Kettle (inside)
Power supply base
Be sure to unplug the power cord.
Failure to do so may cause electric shock.
Cool and unplug the appliance before cleaning.
Failure to do so may cause electric shock or scalding (or burns).
Do not submerge the kettle, power base, power cord or power plug in water.
Doing so may cause electric shock or the appliance to emit smoke or catch fire.
Do not use detergent to clean the appliance.
Residue from detergent may lead to malfunction or overflow and cause scalding (or
burns) or injuries.
When cleaning the appliance, do not use abrasive detergent, polishing pad or
metal brush.
Doing so may peel the surface coating or deteriorate the resin, resulting in smoke
emission or fire.
• Do not use cleanser, benzine, thinners or metal brush to clean the appliance.
Doing so may scratch or deform the appliance.
• Do not wash the whole appliance.
Doing so may cause malfunction.
• Clean and dry all parts before storing the appliance.
Store the appliance in a box or in a clean and dry place.
Store the power cord in the cord holder. Do not wrap the cord around the kettle or the
power base.
Descaling
To clean off stains inside of the kettle, follow the procedure below.
Vinegar
(1 to 2 tsp)
+
Water (0.6 L)
(Full)
Wipe the kettle with a tightly wrung soft cloth.
Rinse the inside of the kettle with water only.
Wipe the power base with a tightly wrung soft cloth.
Start boiling
and then leave
the kettle for
an hour
Cleaning
– 10 –
Be sure to line the cord so that it
emerges from the indent of the power
base and ensure that the power base is
used on a flat surface.
Empty
Water
the
(0.6 L)
kettle
(Full)
Start
Empty
boiling
the
again
kettle
Rinse
Advertisement
Table of Contents
