SHORT CORD INSTRUCTIONS ………… 2 Instruction Manual Limited Warranty Safety Precautions ……………………… 3 Contents of the package ………………… 7 Thank you for purchasing BALMUDA The Kettle. Names of parts …………………………… 7 Before using the appliance ……………… 8 Using the appliance ……………………… 8 Precautions for use ………………………...
Send the appliance to the BALMUDA Support Center for examination, repair or adjustment. The use of accessory attachments not recommended by BALMUDA may result in fire, electric shock or injury to persons.
SHORT CORD INSTRUCTIONS • A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. • Extension cords may be used if care is exercised in their use. • If an extension cord is used: 1) The marked electrical rating of the extension cord should be at least as high as the electrical rating of the appliance.
Safety Precautions Read the Safety Precautions carefully before use to ensure correct operation. The precautions described in this manual must be followed to ensure safe use of this appliance and prevent hazards to you and other people, as well as damage to the appliance and your home or property.
Page 5
Do not use the appliance for any purpose other than those recommended in this instruction manual and by BALMUDA. Doing so may cause accidents such as fire or electric shock. BALMUDA accepts no responsibility in case of improper use or failure to follow these instructions.
Page 6
WARNING Do not replace the power cord yourself. Doing so may cause fire or electric shock. Please contact the BALMUDA Support Center if the power cord is damaged. Do not sharply bend, wind, pull, or pinch the power cord. Doing so may cause fire, burns, or electric shock.
Page 7
Installing the appliance WARNING Do not place the appliance close to any high-temperature objects such as stoves or toasters. Doing so may cause electric shock due to deformation or breakage. Do not place the appliance on any kind of range, stove, cooktop or any sort of heater.
■ Contents of the package Kettle Power base Instruction manual ■ Names of parts Steam vent Spout Knob Handle Nozzle Boiling lamp Kettle Switch connector Body Power base connector Power plug Cord outlet Power cord holder Power cord – 7 –...
■ Before using the appliance Perform the following procedure more than twice to clean the appliance before using. 1. Remove the cap on the spout and rinse out the inside of the appliance. 2. Fill the appliance with 0.6 L of water (to the MAX level). 3.
Lower the switch to turn on the power. (The boiling lamp lights up and boiling starts.) When water has boiled, the power automatically turns off and the boiling lamp goes off. To turn off the power midway, raise the switch or remove the appliance from the power base.
■ Using the power cord holder Adjust the cord to a suitable length and store Be sure to line the cord so that it the rest of the cord in the bottom of the emerges from the indent of the power power base.
The appliance is hot. temperatures. Do not touch any parts of the appliance other than the handle while it is hot. Warranty Policy and Privacy Policy For information on warranty and privacy policies, please refer to the BALMUDA website (https://us.balmuda.com). Product Specifications Model...
Need help?
Do you have a question about the K02H Series and is the answer not in the manual?
Questions and answers