Precautions For Use - BALMUDA K02H-BK Manual

Lower the switch to turn on the power. (The boiling lamp lights up and boiling
starts.)
When water has boiled, the power automatically turns off and the boiling lamp goes off.
To turn off the power midway, raise the switch or remove the appliance from the power
base.
Do not open the lid while boiling.
Hot water may spurt out and cause
scalding (or burns) or injury.
Do not leave the appliance
unattended while boiling.
If someone touches the appliance
without realizing that it is in use, they
may scald themselves.
Pouring hot water.
Do not over-tilt the appliance while
pouring.
Hot water may leak out of the steam
vent, causing scalding (or burns).

■ Precautions for use

Do not over-tilt the appliance.
Doing so may cause scalding (or burns) due
to hot water leaking out of the switch area
or steam vent.
ON
After use, unplug and empty the
appliance.
Failure to do so may cause discoloring and
corrosion inside the appliance.
Condensation may appear around the
switch area. This is not a defect. The
appliance will automatically turn off
when it detects steam from the switch
area.
– 9 –
Do not place your face or hand
near the steam vent while boiling.
Doing so may cause scalding (or
burns).
Click!