Related Manuals for RadioLink CM210
Summary of Contents for RadioLink CM210
- Page 1 RadioLink Electronic Ltd www.radiolink.com CM210 Balance Charger (for 2S LiPo battery) User Manual Note: To ensure the safe use of CM210, please read this manual carefully before use.
- Page 2 RadioLink Electronic Ltd www.radiolink.com Contents 1. Safety Precautions ..................... 3 2. Functions ........................4 3. Speficifications ......................5 4. Instructions for Use ....................5 5. LED Indicator Status ....................6 6. Voltage Calibration of CM210 ..................7...
- Page 3 1. Safety Precautions (1) Please read this manual carefully before using to make sure CM210 is safely operated. (2) Please connect CM210 to the power supply first, and then connect the 2S LiPo battery for charging. (3) Keep the charger always away from children and pets.
- Page 4 RadioLink Electronic Ltd www.radiolink.com 2. Functions (1) Low-power precharge: When it is detected that the voltage of a single cell of the battery is lower than 3.0V, a small current is used to activate the battery to restore the battery capacity.
- Page 5 4. Instructions for Use Insert one end of the standard USB cable into the Type-C input port of the CM210 charger (as shown in the picture below), and then connect the other end of the USB cable to power supply equipment such as power bank, computer, mobile phone adapter, etc..
- Page 6 RadioLink Electronic Ltd www.radiolink.com When all four LED indicators turn solid green, the battery is fully charged, and the charger will automatically stop charging. Remove the battery and then disconnect the power supply. 5. LED Indicator Status LED indicator status...
- Page 7 Then the MCU runs the calibration program inside . When all the green LED indicators are on at the same time and then go out, the calibration is completed Thank you again for choosing RadioLink product.
Need help?
Do you have a question about the CM210 and is the answer not in the manual?
Questions and answers