Settings; Intro Operation Customer Highway/City Mode; Warranty; Assistance - Cobra RAD250 Operating Instructions Manual

Settings

Your Detector
Intro Operation Customer

Warranty

Settings

Assistance

Highway/City Mode
Setting your detector to City mode sensitivity delays all X band audio alerts at
lower signal strength levels. (A single beep will sound when the signal is first
Secondary Icons
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what you will
see and hear as you complete each step. The factory setting is Highway mode.
Notice
Highway Mode
SEN Button
X/K Ka L V/S
Press and
release
City Mode
X/K Ka L V/S
C
To Change From Highway Mode To City Mode
Press and release Audible Tone
the SEN button.
One beep
To Change From City Mode To Highway Mode
Press and release Audible Tone
the SEN button again.
Two beeps
6 English
•
Visual Display
C LED Lights
Visual Display
C LED Turns Off
Settings
Your Detector
Intro Operation Customer Warranty

Anti-Falsing Circuitry

Assistance
Your RAD 250 is designed to provide you the truest alerts and minimize the
distraction of erroneous signals from radar-based fixed-position and moving sources.
• Adjustable Sensitivity: City / Highway modes allow driver to adjust sensitivity
to driving environment, reducing false alarms from fixed position sources such as
Secondary Icons
automatic door openers.
• IVT Filter: system automatically reduces false alerts from moving
In-Vehicle Technology sources such as collision avoidance systems and adaptive
cruise control.
Notice
Manual Mute
Your detector allows you to quickly turn Off an audio Alert by momentarily pressing
the Mute button. If you press the Mute button a second time during
the Alert, the audio Alert will be turned back On.
Auto Mute will automatically reduce the audio volume of all alerts after four seconds
for as long as the signal is detected. The factory setting for Auto Mute is On.
To Turn Auto Mute Off
Audible Tone
Press and release
the Mute button
One beep
while no alert
is occurring.
To Turn Auto Mute On
Audible Tone
Press and release
the Mute button
Two beeps
again while no
alert is occurring.
Mute Button
Press and
release
Visual Display
Audio Only
Visual Display
Audio Only
Nothing Comes Close to a Cobra 7
®