Guide For Steam/Dry Selector; Using The "Power Shot - Panasonic NI-S630 Operating Instructions Manual

Guide for Steam/Dry selector

Steam/Dry Temperature
selector zone
Choose
Dry according to the
type of fabrics.
Low
steam
High
steam
Please make sure the temperature select indicator setting is
on " MAX " when using " high steam ".
CAUTION:
Do not aim the steam at any parts of your body or others.
Notes:
• The anti-drip system will activate when the temperature of
the soleplate's surface drops. The thermostat operating
indicator light will go on and steam will stop. It is normal to
hear clicking sound during this process. Resume usage
only after the thermostat operating indicator light has
• Use an ironing board to support the steam iron.
Recommendations
For polyester and other
For thin or delicate fabrics
requiring a small amount
of steam.
For fabrics requiring a
lot of steam. (i.e. thick
materials, items with
stubborn wrinkles).
steam zone

Using the "power shot"

The " power shot " feature provides extra steam which goes
deep into the garment and is helpful for removing stubborn
wrinkles. It is necessary to clean the inside of the iron before
using the "power shot" feature, if you have not used the
"power shot" feature for a prolonged period. Simply test the
"power shot" feature several times away from the ironing
board and clothes to be ironed. This will prevent brown
spotting or water spotting on the clothes.
Set the steam/dry selector to the dry position.
Set the temperature selector to the " MAX " position.
Simply pump the power shot button
• Pump the power shot button several times at the beginning
of each ironing session.
• Press the power shot button in intervals of at least 2 seconds
during the use to prevent water spotting.
• If the power shot weakens, wait until the thermostat
operating indicator light goes on, and then off.
• Use a press cloth if necessary.
13