Page 1
PoE Tester Manual DN-95210 Use this PoE tester to determine if a network cable or port is providing Power-Over-Ethernet. When you plug a network cable into the tester (or connect the tester to a network jack), an LED will light up if active 24-48V PoE is detected.
Page 2
Features Detectable IEEE802.3 af/at PoE standard Identification of Mid-Span (4/5 7/8) and End-Span (1/2 3/6) Testing cable is included for PoE port testing. No additional power supply or battery Package Content PoE Tester x1 Test Cable x1 ...
Need help?
Do you have a question about the DN-95210 and is the answer not in the manual?
Questions and answers