Ford ESCAPE 2008 Wiring Diagrams page 18

Electrical System General Procedures
• Connectors can be disconnected by pressing or
pulling the lock lever as shown.
Locking Connector
• When locking connectors, listen for a click indicating
they are securely locked.
Inspection
• When a tester is used to inspect for continuity or
measuring voltage, insert the tester probe from the
wiring harness side.
• Inspect the terminals of waterproof connectors from
the connector side since they cannot be accessed
from the wiring harness side.
Caution
• To prevent damage to the terminal, wrap a thin
wire around the tester probe before inserting
into terminal.
NO GOOD NO GOOD NO GOOD
15
00P
WGIWXX0042E
X3U000WB1
WGIWXX0044E
NO GOOD
WGIWXX0045E