Page 2
PARTS & DESCRIPTION Nozzle Hose Handle Hose Handle Lock button ON/OFF switch Join the Extension tubes with a twisting force. Extension tube Cable Rewind button Insert the Extension tube into the Extension tube • Floor Brush • Crevice nozzle Extension •...
Page 3
To connect Hose: Insert the To disconnect Hose: Hold the The Suction Control switch Press the ON/OFF switch to turn Suction Head of the Hose Suction Head of the Hose and situated at the Hose Handle the appliance ON or OFF. into the Hose Socket and rotate clockwise to loosen.
Page 4
Before use, check the integrity of the appliance and power cable. In case you are WARNINGS not sure, contact a qualified person. If the power cable is damaged, it must be replaced by the manufacturer or its service agent or a qualified technician in order ATTENTION : to avoid a shock hazard.
Page 5
Hold the plug when rewinding the power cable. DO NOT allow the plug and the HOW TO CLEAN cable to whip around when rewinding. DO NOT use the cable as a handle, pull or carry the appliance by the cable, pull the cable around sharp edges, abrasive WARNING: The appliance must NEVER be used without the HEPA filter.
Page 6
Note: ENVIRONMENTAL TIP Clockwise clockwise & anti-clockwise direction is determined by looking This appliance, along with all other electronic appliances, should, when it is no longer directly downwards, with the Handle capable of functioning, be disposed with the least possible environmental damage directly below the eye according to the local regulations in your area.
Need help?
Do you have a question about the iVAC PPV1400 and is the answer not in the manual?
Questions and answers