Table of Contents
Advertisement
Module instal-
lation
It is optional in which slots you place the individual input modules in the input
section. For convenience each slot has been given a number, and an over-
view of the slot numbers has been placed on the inside of the door of each
unit.
Note
Slot no. 1 is placed in the top left-hand corner of the input section
when you face the front of the unit.
You install an input module by sliding the module into a module slot in the in-
put section of the headend unit and push it till the module clicks into place.
Note
You can use hot swapping when you insert an input module into
or remove an input module from the TDX system.
5
Basics
Advertisement
Table of Contents
