Test The Functions - Kohler C3 K-4737T Homeowner's Manual

Supply Stop

Test the Functions

Wrap the seat with plastic wrap to prevent water from spraying from
the toilet during testing.
Plug in the power cord and press the power button located at the right
side of the seat while top indicator starts to flash. Then the tank
begins water filling action. The indicator stops flashing to indicate the
water filling action is completed.
The seet is designed not to function without an occupant. To activate
the seat controls for testing purposes, when facing the toilet, place
your hand or a damp wash cloth on the right side of the seat
approximately 1/3 from the front of the seat( sensor area).
Proceed to the "Keypad and Panel Diagram" and "Operation"
Sections to test the various seat functions.
Kohler Co. 11
Press "POWER"
icon
1119101-T01-F