Kohler C3 K-4737T Homeowner's Manual page 18

Toilet seat with bidet functionality
Table of Contents

Advertisement

Troubleshooting(cont.)
General Functions
Symptoms
1. Power light is not
on
2. Funtions are not
working
3. Seat is loose
4. The nozzle no
water out
1119101-T01-F
Probable Causes
A. Power cord may be
loose or disconnected.
B. Ground-Fault Circuit
Interrupt(GFCI) may be
Tripped.
C. The power button is
not activated.
D. None of the above
actions correct the
symptom.
A. Power failure occurred.
B. The power cord is
disconnected.
C. Power cord suffers
electricity leakage.
Connector plug is not
reset.
D. The power is not
switch on.
E. You have not touched
the seat sensing area.
F. Thermal protector to
open automatically to
protect.
G. None of the above
actions correct the
symptom.
A. Screws and nuts are
loose.
A. Seat does not detect
user.
B. Water supply stop
closed.
18
Recommended Action
A. Check the power
cord connection.
B. Reset the GFCI and
locate the problem.
C. Press "Power" icon
on the side.
D. Contact a KOHLER
Service Representative.
A. Wait until the power
is restored.
B. Insert the power cord
into an electrical outlet.
C. Press the "Reset"
icon on the plug.
D. Press "Power" icon
on the side.
E. You have to sit inside
the seat sensing area.
F. Allow the seat to cool
to room temperature.
G. Contact a KOHLER
Service Representative.
A. Tighten the acrews
and nuts according to
the installation guide
A. Sit on the seat.
B. Power off and solve
the problem, power on.
Kohler Co.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

C3 k-4753tC3 k-4772tC3 k-r4737tC3 k-r4753t

Table of Contents