Introduction; Package Contents; Installation; Important Notes - Boss Audio Systems MR4.3W User Manual

Installation

Important notes

• Consult an expert when in doubt about installation. Professional installation is always recommended.
• This product is weather resistant, but not waterproof. Occasional moisture will not affect performance. Allow
the product to ventilate and dry after water moisture.
• To maximize product life, position in areas protected from the elements, such as the underside of eaves
and overhangs.
• Use only mounting kit provided with the product.
• Before mounting, make sure the wall/ceiling can support the weight of this product.
• Before you drill any holes for wall/ceiling mounting, make sure there are no cables, wires or pipes located
underneath the surface.
• Make sure this product is firmly secured to the wall to avoid falling and causing injuries.
• Do not remove the grilles from the speakers. There are no user-serviceable parts behind the grille.
Removing the grille will damage the speaker.

Placement

NOTE: Room acoustics can largely affect sound performance, such as room shape and size, type of wall and
ceiling, windows and reflective surface.
Follow these guidelines for speaker placement to attain best sound effect.
• Place the speakers towards the listening area.
• Place the speakers at least 6'10" (2.08 m) apart.
• Place the speakers well above ear level.
• Place the speakers on either side of your AV receiver, and the three are at equal distance from your listening
position.
• Place the speakers in a corner or near a wall to achieve greater bass where additional energy can be
reflected from the walls.
• Experiment with various speaker positions to find the optimal setting for you.

Mounting

Multiple options are available for you to install the speakers, as described below.
TIP: You may rotate the badge on the speaker grille to a preferred position when the speakers are installed
horizontally or other angled ways.
Placing on tabletop
You may simply place the speakers on a table or other flat surface. Make sure the surface is stable and sturdy.
- 2 -