Table of Contents
Advertisement
8.4 Language
The default language is English. To change, select Menu > System
settings > Language >then select your language.
8.5 Factory reset
A factory reset clears all user defined settings, replacing them
with the original default values, so time/ date,preferences/
settings and DAB station list are all lost.
If you select Factory reset, you are asked to confirm by
selecting " Yes".
9 Troubleshooting and error messages
9.1 Error messages
Message
DAB mode
Service not available No DAB reception
The DAB signal has been interrupted .
Signal error
The listed station cannot be found .
No DAB Station
(No Name)
The current station does not broadcast an identity name.
No DAB stations are available - check aerial .
No stations found
FM mode
No RadioText
No RDS text information is available on this station.
No RDS programme type information is available .
No PTY
No Name
No RDS station name is being broadcast
General messages
Update failed
Software upgrade failed
Description
15
Message
No time value is currently set on this platform .
Time is not set
Time Not saved
Any changes made to the time settings will be lost.
Any changes made to the Alarm settings will be lost .
Alarm Not saved
The entered value does not match a valid date .
Invalid Date
9.2 Troubleshooting
Cause
Problem
Check / move antenna, Move radio
FM : Hiss
Rescan high - strength stations only.
Low signal
DAB : burbling /
For DAB or DAB +, check the
strength
intermittent
current status of local coverage
cut - out
with your national digital radio
authority .
DAB
:
Low signal
No stations
strength
As above then rescan stations
available
'
message
Description
Solutions
16
Hide quick links:
Advertisement
Table of Contents
