Bluetooth Mode; Alarms Snooze And Sleep; Alarms - MangoKit MD3 Owner's Manual

5.3 Settings
Scan settings
By default, FM scans stop at any available station (All
stations) .This may include poor quality audio from weak
stations.
Options: Strong stations only | All stations
To change the scan settings, to stop only at stations with good
signal strength
Select Menu > Scan setting then Strong stations only.
Audio settings
By default, all stereo stations are reproduced in stereo. For
weak stations, this may result in poor quality audio. The audio
quality can be improved using mono.
Options: Stereo allowed | Forced mono
To play weak stations in mono
Select Menu > Audio setting > Forced mono.
6. Bluetooth
Bluetooth mode allows MD3 to act as a wireless speaker playing
audio content from a connected Bluetooth capable device.
To enter Bluetooth mode: Press source to choose Bluetooth mode
To connect a Bluetooth capable device. Use your Bluetooth
capable smart device to pair and connect with the MD3.
9
6.1 Display information
The screen displays either a Bluetooth Pairing or Bluetooth
connected message depending on the connection state

7 Alarms snooze and sleep

As well as a clock/calendar, there are two versatile wake-up alarms
with snooze facility, and a sleep function to turn the system off after
a set period of time. The alarm sound for each alarm can use a
buzzer or a selection from the audio sources.
To set the clock/ calendar
The settings for the internal clock and setting Alarm, Snooze
and Sleep function are all accessible via the Systems Setting
menu.

7.1 Alarms

Note: Alarms will only function when the MD3 unit is On or in
Standby mode.
An active alarm is indicated by its icon in the bottom line of the
display.
Note: Alarms can be switched on or off in standby mode (see
below).
To set alarms
Press Menu/System setting/Alarm and use the Select control knob
to select the required Alarm 1 or 2.
To exit alarm setting mode, press Menu or Back (alternatively, the
Alarm display will timeout and automatically return to the Now
Playing screen after a short time).
The alarm setup prompts you for the following parameters.
Select a value for each parameter in turn
control button and press Select to confirm and move on to the
next parameter.
Parameters
Alarm – Off | On
Frequency - Daily | Once | Weekends | Weekdays
.
turning the select
10