Backlight - MangoKit MD3 Owner's Manual

To navigate through the menus
The following controls are used to move about the menu tree to
choose and select the required settings:
SELECT– (pressing the Select knob) this selects the currently
displayed option, if the option has a further sub-menu the first option
of the sub-menu is displayed. If the option is a setting value, the
displayed value is selected and either the next setting is highlighted
or, if there are no further settings, the display returns to the parent
menu for that setting.
SELECT knob– cycles forwards and backwards through the current
menu or setting options.
BACK - jumps back to the parent menu of the currently
displayed menu or setting.
MENU to return to the Now Playing screen.
8.1 Equalizer
This presents a My Equaliser option to allow you to create your
own equaliser settings.
My EQ... | Normal | Classic | Jazz | Pop | Rock | Speech
8.1.1 My EQ setup...
This option allows you to set a bias in the treble and bass audio
frequencies and turn 'Loudness' On or Off. Values can be set
between -7 (Minus 7) and +7 (plus 7).
Treble – (Use the select control button to choose a bias value
between -7 and +7)
Bass – (Use the select control button to choose a bias value
between -7 and +7)
Loudness – No or Yes. (When Yes, low-level high and low frequency
sounds are boosted to give a 'fuller' sound.)
13
8.2 Time/Date
The time and date can be updated manually or automatically With
auto-update, the time and date are automatically synchronised with
national time signals broadcast over DAB and FM (when available).
You can also select the display format for the time and date.
The Time menu contains the following options:
• Set Time/Date – (see below)
• Auto update - Update from Any | Update from digital radio | Update
|
from FM No Update
• Set 12/24 hour - 12 | 24
• Set date format - DD-MM-YYYY | MM-DD-YYYY.
Set time/ date
This option is for manually setting the time and date
displayed.The time displays as hh: mm, with the first value,
hh, active ( flashing). Adjust each value using the select control
button and press Select to confirm. The next value then
becomes active and flashes. The date values follow and are set
in the same way.
Note: The date displays as DD- MM- YYYY or MM- DD- YYYY
depending on your choice of date format ( see above) .
8.3

Backlight

The MD3 has a backlight with three brightness settings, and
adjustable timeout (this is the time delay, in seconds, after which the
display switches to the Dim level).
:
There are three settings
• Timeout - Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 sec
• On level - High | Mid | Low
• Dim level - High | Mid | Low
14