Started And Setup; Dab Radio Mode - MangoKit MD3 Owner's Manual

3. Started and setup

MD3 is easy to use. To play DAB or FM radio, all you need is a
power source (a 100-240 V mains supply);
1). Place MD3 on a suitable shelf or table.
2). Extend the telescopic antenna.
3). Connect the power adaptor between MD3 and the mains supply.

4. DAB radio mode

DAB radio mode receives DAB/DAB+ digital radio and displays
information about the station and programme /track as broadcast.
To enter DAB mode, either press Mode until the display shows DAB
Radio.
4.1 Scanning for stations
The first time you use MD3, or if the station list is empty
radio automatically performs a full scan to see what stations are
.
available You may also need to start a scan manually to update
the list of stations for one of the following reasons
New stations may become available from time to time
If reception was not good for the original scan (for example the
antenna was not up), this may result in an empty or incomplete list of
available stations.
If you have poor reception of some stations causing the audio to
break up, you may wish to list only stations with good signal
Strength.
To do a full scan Select Menu > Full scan.
Once a scan is complete, the radio returns to playing the
previously-selected station or first station on the station list.
,
the
:
.
5
To remove stations that are listed but unavailable Select Menu
> Prune invalid.
4.2 Manual tune
As well as the normal method of scanning
/
tune to a particular channel frequency
adjusting your antenna to achieve the best possible reception and
scanning a particular channel to update the station list
To manually tune
>
Press Menu Manual tune then use select control button to display
/
a particular channel frequency
/ .
channel frequency
The display shows a live indication of the received signal strength
.
on the selected frequency
Adjustments to your antenna will be manifested in the received
signal strength displayed.
Note: The division in the signal strength bar indicates the audio
quality threshold – if the signal strength, as indicated by the solid
rectangles, falls below this threshold the audio quality will
deteriorate.
When a channel/frequency is selected MD
stations on the selected frequency and updates the station list with
any new stations found. To listen to any stations found return to the
Now playing screen and select the required station from the station
list as normal.
,
you can also manually
.
This can be useful for
.
,
press Select to tune to that
3
also scans for any DAB
6