Advertisement
KN Interface
Dimensions
External dimensions
Wall mount
During installation, secure the metal plate and mold case (bottom) together with screws.
After wiring, attach the mold case (top), install the metal plate cover, and secure with a screw.
NOTE
When installing the interface on the plane surface instead of mounting it on the wall and securing with screws, secure the unit with double-sided adhesive tape or
similar stuff.
Connections
70
70
Secure with screws
Mold case (bottom)
(2 locations)
A B bus
KNX TP-1 bus
28
Mold case (top)
KNX Programming button
KNX Programming LED
Installation Manual
3
-EN
Advertisement
