Washing Results - Siemens SR93EX28ME User Manual

Washing results

Fault
Tableware is not dry.
Cause
No rinse aid used or dosage
set too low.
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
Water collects in recesses of
the tableware or cutlery.
The combined detergent
used has a poor drying per-
formance.
Extra Dry not activated to im-
prove drying performance.
Tableware removed too
early or drying process not
yet ended.
Rinse aid used has a limited
drying performance.
Appliance door does not
open automatically at the
end of the programme
Troubleshooting en
troubleshooting
Add "Rinse aid" → Page 26.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 27
"Select a programme with drying,
▶
e.g. intensive, strong or ECO pro-
gramme." → Page 18
Some option buttons decrease the
drying result, e.g varioSpeed.
Position tableware at an angle
▶
where possible.
Use rinse aid to improve drying per-
1.
formance.
Use a different combined detergent
2.
with a better drying performance.
Activate Extra Dry.
▶
Wait until the programme ends.
1.
Only remove tableware 30 minutes
2.
after the programme has ended.
Use a name-brand rinse aid.
▶
Eco products may have limited ef-
fectiveness.
Adjust the appliance door as de-
▶
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.
47