Table of Contents
Advertisement
en Troubleshooting
Fault
Appliance door opens too
wide at the end of the pro-
gramme.
Appliance door does not
open.
Appliance door opens too
wide when activated.
44
Cause
Door is not correctly adjus-
ted.
Wrong screws used to ad-
just the door gap.
Childproof lock is activated.
Door is not correctly adjus-
ted.
Appliance has no power.
Appliance door and door
seal are soiled.
Automatic door opening is
not in home position.
Door is not correctly adjus-
ted.
troubleshooting
Adjust the appliance door as de-
▶
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.
Use size 4X30 bolts to adjust the
▶
door gap.
The bolts are included in the scope
of supply.
If you use bolts that are too long,
this can deactivate the function of
automatic door opening.
Press the top of the door in the
▶
middle twice in quick succession.
Adjust the appliance door as de-
▶
scribed in the installation instruc-
tions.
Check the mains plug and fuses.
▶
Position the emergency release
1.
supplied on the top right and left of
the cabinet panel.
Open the appliance door by pulling
2.
lightly.
Clean the appliance door and door
▶
seal with a damp cloth and a little
washing-up liquid.
Wait one second after closing the
▶
appliance door.
Adjust the appliance door as de-
▶
scribed in the installation instruc-
tions.
Advertisement
Table of Contents
