Home Connect Problem; Information On Display Panel - Siemens SR93EX28ME User Manual

Table of Contents

Advertisement

Fault
Excessive formation of foam
occurs.

Home Connect problem

Fault
Connection to home net-
work is not established.
WLAN display is flashing.
Home Connect cannot be
implemented correctly.

Information on display panel

Fault
Special salt refill indicator
lights up.
Refill indicator for special
salt does not light up.
Refill indicator for rinse aid
lights up.
Refill indicator for rinse aid
does not light up.
Cause
Hand washing-up liquid is
present in dispenser for
rinse aid.
Rinse aid has been spilled.
Detergent or appliance care
product used causes excess-
ive foaming.
Cause
WLAN on router is not act-
ive.
Connection to home net-
work is not available.
Home Connect set incor-
rectly.
Technical fault is present.
Cause
Insufficient special salt.
Sensor does not detect spe-
cial salt tablets.
Water softening system is
switched off.
Insufficient rinse aid.
Rinse aid system is switched
off.
Troubleshooting en
troubleshooting
Immediately add rinse aid to the
dispenser.
→ "Adding rinse aid", Page 26
Remove the rinse aid with a cloth.
Change the brand of detergent.
troubleshooting
Check the wireless network con-
nection of your router.
Activate the wireless network con-
nection on your router.
Please consult the documents sup-
plied for Home Connect.
Please consult the information
about support in the documents
supplied for Home Connect.
troubleshooting
Add "Special salt" → Page 24.
Do not use special salt tablets.
Setting the water softening system
Add "Rinse aid" → Page 26.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 27
Set the amount of rinse aid to be
dispensed.
53

Advertisement

Table of Contents
loading

Table of Contents