2200W ANGLE GRINDER COMPONENT LIST Spindle Lock Button Locking Button of Turnable Handle Main Handle Power Cord Guard Lock-Off Switch Carbon Brush Cap Auxiliary Handle Wheel Guard for Grinding Grinding Wheel* (not included ) Inner Flange Outer Flange Spanner Wheel Guard for Cutting* (not included ) *Not all the accessories illustrated or described are included in standard delivery.
Page 5
2200W ANGLE GRINDER GENERAL POWER TOOL SAFETY increase the risk of electric shock. e) When operating a power tool outdoors, use an WARNINGS extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of WARNING! Read all safety warnings and all electric shock.
Page 6
2200W ANGLE GRINDER c) Disconnect the plug from the power source and/ can be attached to your power tool, it does not or the battery pack from the power tool before assure safe operation. d) The rated speed of the accessory must be at making any adjustments, changing accessories, least equal to the maximum speed marked on or storing power tools.
2200W ANGLE GRINDER a) Maintain a firm grip on the power tool and contacting a “live” wire may make exposed metal position your body and arm to allow you to resist parts of the power tool “live” and could give the kickback forces.
2200W ANGLE GRINDER SAFETY WARNINGS SPECIFIC FOR are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel SANDING OPERATIONS thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from a) Do not use excessively oversized sanding disc grinding wheel flanges.
2200W ANGLE GRINDER Wheel Guard for Grinding Double insulation The coded projection on the wheel guard (8) ensures that only a guard that fits the machine type can be mounted. RCM marking Loosen the Clamp Adjusting Nut (15). Place the wheel guard (8) with coded projection into the coded groove on the spindle of the machine head ABN: Australian Business Number.
Page 10
2200W ANGLE GRINDER raised portion facing away from the disc. (See Fig C2) the disc is in contact with the work piece. Allow the Press in the spindle lock button (1) and rotate the disc to reach full speed before starting to grind. spindle by hand until it is locked.
2200W ANGLE GRINDER coil spring. Ensure the brush is located and free to by the manufacturer, its service agent or similarly move, release the spring; it should now sit within the qualified persons in order to avoid a hazard. groove on the brush. Re-attach the spade connector to the terminal, replace the cover and secure.
Page 12
POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...