1. Manuals
  2. Brands
  3. Rockwell Manuals
  4. Grinder
  5. RD4740
  6. Manual

Rockwell RD4740 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RD4740
750W ANGLE GRINDER
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RD4740 and is the answer not in the manual?

Questions and answers

Related Manuals for Rockwell RD4740

Summary of Contents for Rockwell RD4740

  • Page 1 RD4740 750W ANGLE GRINDER...
  • Page 3 RD4740...
  • Page 4 RD4740...

  • Page 5: Component List

    750W ANGLE GRINDER COMPONENT LIST Auxiliary Handle Spindle Locking Button On/Off Switch Grinding Disc*(not included) Protection Guard for Grinding Spanner Inner Flange Outer Flange Guard Clamping Lever Coded Projection Protection Guard for Cutting* *Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES Auxiliary Handle Protection Guard For Grinding...

  • Page 6: General Power Tool Safety

    750W ANGLE GRINDER GENERAL POWER TOOL SAFETY 3. PERSONAL SAFETY a) Stay alert, watch what you are doing and use WARNINGS common sense when operating a power tool. Do not use a power tool while you are tired or under WARNING! Read all safety warnings and all the influence of drugs, alcohol or medication.
  • Page 7 750W ANGLE GRINDER to operate the power tool. Power tools are accessory must be within the capacity rating of your power tool. Incorrectly sized accessories dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or cannot be adequately guarded or controlled.
  • Page 8 750W ANGLE GRINDER accessory. Accessory may kickback over your spinning accessory may grab the surface and pull the power tool out of your control. hand. m) Do not run the power tool while carrying it at c) Do not position your body in the area where your side.

  • Page 9: Additional Safety Instructions For Cutting-Off Operations

    750W ANGLE GRINDER SYMBOLS f) Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and To reduce the risk of injury, user must read instruction manual may burst.

  • Page 10: Assembly And Adjustment

    750W ANGLE GRINDER INTENDED USE 3. Grinding/Cutting Disc (See Fig. D1-D3) The machine is intended for cutting, roughing and Place the inner flange (6) onto the spindle. brushing metal and stone materials without using (See Fig. D1) water. For cutting metal, a special protection guard for Place the disc on the tool spindle and inner flange.

  • Page 11: Maintenance

    750W ANGLE GRINDER grinder motor or break the disc. mains voltage existing, the power tool still has low When cutting, only cut in the opposite direction to the power consumption even when it switched off. disc rotation. If you cut in the same direction as the disc rotation the disc may push itself out of the cut 1.
  • Page 12 POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...

Table of Contents