Assembly Instructions; Disassembly Instructions - Cuisinart Core Essentials MFP-JC Instruction And Recipe Booklet

ASSEMBLY INSTRUCTIONS

Juice Extractor Accessory
To use the Juicing Center Accessory, begin by setting
your food processor base (sold separately) on a clean,
flat surface. Make sure the base is unplugged from the
power outlet.
1. Place juicer adapter on top of Food Processor
base. Turn clockwise to lock the juicer adapter
into place.
Parts needed.
2. Place the filter housing/juice container on the juicer
adapter. Turn clockwise to lock into place.
Parts needed.
3. Insert the micro-mesh filter with cutting disc into
the filter housing, pressing firmly down on rim of
the filter basket so it locks securely in place.
Be careful not to touch the blades on the bottom
of the filter basket and be sure this part is inserted
before every use.
Parts needed.
4. Place the pulp sealing ring on top of
micromesh filter basket. Rotate
counterclockwise to lock into place.
5. Place the juice extractor cover on top of filter
housing and twist into place, making sure to align
locking marks.
Parts needed.
6. Insert the food pusher into the feed tube.
Parts needed.
7. Make sure the flow spout is in the open position.
Never juice with the spout in the closed position.
Part needed.
Citrus Juicer Attachment
1. Place the juicer adapter on top of the Food
Processor base. Turn clockwise to lock into place.
2. Place the filter housing/juice container on top
of the juicer adapter and turn clockwise to lock
into place.
3. Place the citrus juicing basket and reamer on the
spindle in the filter housing.
Parts needed.
4. Place a juice pitcher or container under the
flow spout. Make sure the flow spout is in the
open position. Never juice with the spout in the
closed position.
5. Plug in power cord. Your citrus juicer is now ready
to be used.

DISASSEMBLY INSTRUCTIONS

Disassembling the Juice Extractor
1. Unplug the food processor base.
2. Remove the food pusher from cover.
3. Make sure the flow spout is in the closed position.
4. Turn cover counterclockwise to unlock, then lift
and remove cover from filter housing.
5. Carefully remove the micro-mesh filter basket
from filter housing by pulling up on the sides of the
rim. Be careful not to touch the blades in the
bottom of the basket. DO NOT touch the metal
shaft in the center of the micro-mesh filter
basket as it may be hot after using.
4