Advertisement
shocks caused by current
leakage from the refrigerator.
- This may result in an electric
shock, fire, explosion, or
problems with the product.
- Never plug the power cord
into a socket that is not
grounded correctly and make
sure that it is in accordance
with local and national codes.
• Plug the power plug into the
wall socket firmly. Do not
use a damaged power plug,
damaged power cord or
loose wall socket.
- This may result in an electric
shock or fire.
• Do not plug several
appliances into the same
multiple power board. The
refrigerator should always
be plugged into its own
individual electrical which has
a voltage rating that matched
the rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock of fire.
DA68-03957N (EN)-01.indd 7
• Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power
plug upside down, wire can
get cut off and cause fire or
electric shock.
• Do not pull or excessively
bend the power cord. Do not
twist or tie the power cord.
Do not hook the power cord
over a metal object, place a
heavy object on the power
cord, insert the power cord
between objects, or push the
power cord into the space
behind the appliance.
- When moving the refrigerator,
be careful not to roll over or
damage the power cord
- This may result in an electric
shock or fire.
• Do not use a cord that shows
cracks or abrasion damage
along its length or at either
end.
• If the power cord is damaged,
have it replaced immediately
by the manufacturer or its
service agent.
• Do not bend the power cord
excessively or place heavy
articles on it.
• When moving the refrigerator,
be careful not to roll over or
damage the power cord.
English - 7
2022-08-23
5:20:29
Advertisement
