Advertisement
Quick Links
DOUBLE ROPE GLIDER
I N ST R U C T I O N S
NOTE. Instructions not to scale.
ASSEMBLY
STEP 1. Align left arm assembly with frame. Insert 3.5" Hex Bolt
through washer, arm and swing body. Secure using washer and lock
nut, repeat this process for all 3 holes both left and right side.
NOTE. Do not tighten bolts until Step 4.
Lock Nut
3.5" Hex Bolt
HARDWARE PACK 1
(6) 4.5" Barrel Bolts
(2) 4" Barrel Bolts
(8) 2" Barrel Bolts
(7) 5" Hex Bolts
(8) 3.5" Hex Bolts
(1) Allen Wrench
(30) Washers
HARDWARE PACK 2
(4) 5/16" Diameter 2.5" Hex Bolts
(16) Washers
SUGGESTED TOOLS
• Rubber Mallet
• Adjustable Wrench
(4) 1" Barrel Bolts
(8) 1" Barrel Nuts
(15) Lock Nuts
(4) Lock Nuts
• Phillips Head Screwdriver
Advertisement
Related Manuals for Nags Head Hammocks DOUBLE ROPE GLIDER
Summary of Contents for Nags Head Hammocks DOUBLE ROPE GLIDER
- Page 1 DOUBLE ROPE GLIDER HARDWARE PACK 1 I N ST R U C T I O N S (6) 4.5” Barrel Bolts (2) 4” Barrel Bolts (8) 2” Barrel Bolts (4) 1” Barrel Bolts (7) 5” Hex Bolts (8) 3.5” Hex Bolts (8) 1”...
- Page 2 ASSEMBLY STEP 2. Position an upright as shown and secure it with (1) 3.5” Hex STEP 3. Attach front and rear table legs to the center table using (2) 5” bolt and a washer on each side of the material with (1) 4” Barrel Bolt Hex Bolts, a washer on each side of the material and a lock nut as shown.
- Page 3 ASSEMBLY STEP 6. Position roll-up as shown and secure it with (6) 4.5” Barrel Bolts, starting with the center upright. 4.5” Barrel Bolt Barrel Nut STEP 7. Attach (2) Shorter Glider Base Spreaders to (2) Glider Leg Assemblies using (8) 2” Barrel Bolts. Note: Beam hidden in image to show bolts The longer spreader is used in Step 9 2”...
- Page 4 ASSEMBLY STEP 8. Use (4) 2.5” Hex Bolts, (16) washers, and (4) lock nuts to attach Glider Frame Assembly to Glider Bench Assembly. Refer to detail image for correct hardware installation. Lock Nut 2.5” Hex Bolt Washer Washer 2.5” Hex Bolt Washer Lock Nut Glider Arm...
- Page 5 When using around fire, keep furniture at a minimum distance of 30 inches from the heat source. Prevent prolonged exposure to chlorinated water. Note that an original sales receipt must accompany any returned product, along with a Return Authorization Number from Nags Head Hammocks customer service; call...
- Page 6 BOX/PARTS BREAKDOWN ARM BOX: BODY BOX: (1) Left Arm Assembly (1) Top Roll-up (8) Left Glider Leg Assembly (2) Right Arm Assembly (2) Outer Upright x 2 (9) Right Glider Leg Assembly (3) Center Upright (10) Shorter Glider Base Spreaders x 2 (4) Center Front Leg x 2 (11) Long Glider Base Spreader (5) Center Rear Leg x 2...