Advertisement
Quick Links
SINGLE ROPE CHAIR/ROCKER
I N ST R U C T I O N S
NOTE. Instructions not to scale.
ASSEMBLY
STEP 1. Start by setting roll-up with left side facing up. Align left arm
with 3 holes as shown. Attach left arm using 3.5" Hex Bolt, with 1 washer
per side, secure with lock washer and repeat for right side.
NOTE. Do not tighten bolts until Step 3, (4 for rocker).
3.5" Hex Bolt
Lock Nut
HARDWARE PACK
(4) 4.5" Barrel Bolts
(2) 4" Barrel Bolts
(8) 3.5" Hex Bolts
(6) Barrel Nuts
(16) Washers
(8) Lock nuts
ROCKER HARDWARE PACK
(8) Washers
(4) Lock nuts
SUGGESTED TOOLS
• Rubber Mallet
• Adjustable Wrench
• Phillips Head Screwdriver
(1) Allen Wrench
(4) 3.5" Hex Bolts
Advertisement
Related Manuals for Nags Head Hammocks NHDWSC
Summary of Contents for Nags Head Hammocks NHDWSC
- Page 1 HARDWARE PACK SINGLE ROPE CHAIR/ROCKER I N ST R U C T I O N S (4) 4.5” Barrel Bolts (2) 4” Barrel Bolts (8) 3.5” Hex Bolts (6) Barrel Nuts (16) Washers (1) Allen Wrench (8) Lock nuts NOTE. Instructions not to scale. ASSEMBLY ROCKER HARDWARE PACK STEP 1.
- Page 2 If you are not satisfied with an item, return it unused in its original packaging for a complete refund or exchange. You can return it to any of our stores or to our warehouse, Nags Head hammocks, 305 Industrial Blvd., Greenville, NC 27834.