Windows Nt Setup - Linksys EFROU44 User Manual

Protocol Setup For Windows NT
The instructions below apply to Windows NT. These
instructions are for your reference. The setup, configu-
ration, and troubleshooting of TCP/IP on NT may dif-
fer if you are on an existing network or if the comput-
er you are using has more than one network adapter
installed. Refer to the documentation and instructions
accompanied by the operating system or contact your
system administrator for any special settings.
1. Boot up NT and log in as administrator.
2. Click on the Start button, select Settings, Control
Panel. The Control Panel window will be displayed.
3. Double-click on the Network icon.
4. Click on Protocols. Check the list of installed net-
work components. If TCP/IP is not installed for your
network adapter, install it now by clicking the Add
button. If TCP/IP is already installed, go to step 6.
5. In the Select Network Protocol dialog box, select
TCP/IP Protocol then click OK. You may need to
provide your NT CD-ROM to complete the installa-
tion.
6. Highlight TCP/IP in the list of Network
Components by clicking on it once, and then click on
the Properties button.
33