Linksys EFROU44 User Manual page 8

Before You Begin
Before you install your EtherFast 10/100 4-Port
Analog Router, you should take careful consideration
and ensure that several requirements have been met on
your network.
The router supports 10Mbps or 100Mbps connections.
It also supports multiple external modem connections.
Please be sure that your network adapters are installed
properly and working, you have a separate telephone
line and an Internet Service Provider (ISP) account for
every modem you plan to use. You must have or obtain
the access phone number, user account and the pass-
word for each of your ISP accounts. If you were using
a Proxy software previously to connect to the internet,
use the instructions that came with the software to
remove the software from your computer. The modem
router will not work properly if proxy software has
been previously installed.
Workstations on your network must have TCP/IP
installed and configured to obtain an IP address auto-
matically using Dynamic Host Control Protocol
(DHCP). If you are using Windows 95, Windows 98 or
Windows NT, detailed instruction about setting up
TCP/IP on Windows 98 or 95 workstations are includ-
5