Linksys EFROU44 User Manual page 14

Connecting the Router to Other Hubs or
Switches
If you are connecting the Analog Router to a Fast
Ethernet hub, remember that Fast Ethernet rules only
allow two hubs to be connected together, or cascaded,
within a single repeater domain. This means you can
only uplink to or from one other device on a Fast
Ethernet network.
To uplink the router, simply push the uplink button on
the back of the router next to the AC port. You may
need to use a pen or other small pointed object.
Connect a regular straight-through Category 5 cable
from the Analog Router's uplink port to any regular
network port on the hub or switch being uplinked. The
Analog Router will automatically determine the opti-
mum speed of the device being attached to it.
The router can be uplinked to other 100Mbps hubs at
a distance of 5 meters (16.4 feet) -- just like Fast
Ethernet or 10/100 hubs.
11