Download Print this page
Shure R191 Replacement Cartridge Instructions
Shure R191 Replacement Cartridge Instructions

Shure R191 Replacement Cartridge Instructions

Advertisement

Quick Links

R191
Replacement Cartridge
Shure online user guide for R191 replacement cartridge.
Version: 3.0 (2020-H)

Advertisement

loading

Summary of Contents for Shure R191

  • Page 1 R191 Replacement Cartridge Shure online user guide for R191 replacement cartridge. Version: 3.0 (2020-H)
  • Page 2 Shure Incorporated Table of Contents DISASSEMBLING THE SM63, SM63L AND SM63LB R191 Replacement Cartridge INSTALLING THE REPLACEMENT CARTRIDGE...
  • Page 3 Shure Incorporated R191   Replacement Cartridge DISASSEMBLING THE SM63, SM63L AND SM63LB Figure 1 (Steps 1-4) Remove grille (A) by unscrewing counterclockwise. Lower set screw (B) by turning counterclockwise. Using long-nose pliers, grip pin connector (C) in bottom of microphone and pull out.
  • Page 4 Shure Incorporated Remove bottom of handle (E) by unscrewing counterclockwise. Pull cartridge (F) and wires out of casing (G). Remove rubber plug element (H) from casing, using caution not to damage rubber plug element. INSTALLING THE REPLACEMENT CARTRIDGE...
  • Page 5 Shure Incorporated Figure 3 (Step 1) Insert replacement cartridge (I) into casing (G). Extreme care should be taken not to damage humbucking coil (J) by scraping against casing. Replace grille (A) by screwing on clockwise. Figure 4 (Steps 2-6) Gently twist wires together. Thread wires through rubber plug element (H), and insert rubber plug element back into casing (G), inserting cartridge end (K) completely through center hole of rubber plug element.