Shure Incorporated R193 Replacement Cartridge Installation Guide Use the following instructions to replace the cartridge in Shure Beta 87 condenser microphones. Remove the microphone grille by unscrewing it in a counterclockwise direction.
Page 4
Shure Incorporated Using tweezers or small needle-nosed pliers, grasp the pins at the end of the blue and green leads and gently unplug them from the cartridge. Be careful when handling the lead wires, as they may easily come loose from the pins.
Page 5
Shure Incorporated Attach the pins of the two leads to the sockets in the cartridge base. The green lead matches the center socket and the blue lead matches the outer socket Install the new cartridge by slipping the rubber loops over the shock-mount posts.
Page 7
Otherwise, noise problems may occur. Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East &...